Description

GENERAL

1.1 Four eyelet Oxford black leather safety stitched toe cap shoe. S3 SRC

1.2 Double density PU/Rubber sole and heel.

1.3 The whole is constructed to comply with the requirements of EN ISO 20345.

2. DETAIL

2.1 Upper Black water resistant leather upper .

2.2 Vamp Lining and Quarter Lining Cambrelle type fabric lining.

2.3 Insole Cellulose board.

2.4 Steel Toe Cap 200 Joules, to EN ISO 20345.

2.5 Sole and Heel Double density PU injection moulded. Anti-static. Oil, petrol, acid, alkali and heat resistant to 130ºC.

2.6 Steel Midsole Penetration resistant stainless steel to EN ISO 20345.

2.7 Footbed Comfort padded fabric with raised instep support.

2.8 Sizes Full sizes 6-13.

3. PERFORMANCE REQUIREMENTS

3.1 Impact Resistance When the footwear is subjected to the 200 Joules impact test as specified in EN ISO 20344, the minimum clearance inside the steel cap area shall not be less than the appropriate value given in Table 4 of EN ISO 20344. (14mm for size 8.)

3.2 Crush Resistance When the footwear is tested in accordance with EN ISO 20344, the minimum clearance inside the steel cap area shall not be less than the appropriate value given in Table 4 of EN ISO 20344. (14mm for size 8 when subjected to 15,000 N.)

3.3 Penetration Resistant Midsole When footwear is tested in accordance with the method described in Clause 5.6 of EN ISO 20344, the force required to penetrate the sole unit shall be not less than 1100 N.